DTA Sound Suppressors

 

       ON SALE currently 20% off ALL DTA Suppressors until August 1st 2009. Start 8/1/2009 we will no longer be offering the $50 discount when paying in full. Future sales will be model specific. Some of our suppressors will no longer be offer at sale prices, so this is the FINIAL Sale for many models. If you're interested in a DTA Suppressor now is the time to purchase.

 

9mm Suppressors:

DeGroat Tactical Armaments, LLC. was given a Military/Government Order to design and manufacture three different models of 9mm suppressors, which went to Iraq for combat use.  While we were in the process of filling the order we manufactured extra parts so we could also offer these suppressors to the Civilian and Law Enforcement market.

 

Mk 99 Mod 0:

Built for use on all 9mm weapons requiring a booster like Glock, Sig, Walther, and etc.

Booster Designed By: DeGroat Tactical Armaments, LLC.

Length= 7.30"
Diameter= 1.25"
Weight= 9.2 ounces
Material= Aircraft Grade Aluminum and Heat Treated Stainless Steel
Suppressor Finish= Type III Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type III Hard-Coat Anodized (green)
Blast Baffle= Stainless Steel
Blast Chamber= Stainless Steel
Booster= 100% Heat Treated 17-4PH Stainless Steel, Integrated Booster Design, 10 Point of Impact (POI) Adjustments, O-ring sealed design, No Tools needed for maintenance, interchangeable piston (for mounting on weapons with different thread pitches), strongest booster and most unique booster on the market, 100% designed and manufactured by DeGroat Tactical Armaments, LLC. Patent Pending
Threads Mount= 1/2" - 28TPI, Stainless Steel.  Only thing required to have a different thread pitch is to replace the booster piston with another one, which only takes a matter of seconds.  Extra pistons available in 1/2" - 32TPI, 1/2" - 36TPI, and 13.5-1mm LH at $65 each
Full Auto Rated= Yes, but excessive full auto use that causes increased wear on both gun and suppressor is not recommended.
PRICE= $625  (Sale Price $500)

 

Mk 9 Mod 0:

Built for the Beretta M9 and 92 Series of Pistols.


Length= 6.95""
Diameter= 1.25"
Weight= 5.9 ounces
Material= Aircraft Grade Aluminum and Stainless Steel
Suppressor Finish= Type III Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type III Hard-Coat Anodized (green)
Blast Baffle= Hard-Anodized Aluminum
Blast Chamber= Hard-Anodized Aluminum
Threads Mount=1/2" - 28TPI, Engraved Aluminum rear cap with a Stainless Steel thread insert.
Full Auto Rated= NO
PRICE= $450  (Sale Price $360)

 

NAVY 9:

Built for the MP-5N (NAVY Models)

Length= 7.92"
Diameter= 1.25"
Weight= 7.8 ounces
Material= Aircraft Grade Aluminum and Stainless Steel
Suppressor Finish= Type III Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type III Hard-Coat Anodized (green)
Blast Baffle= Stainless Steel
Blast Chamber= Stainless Steel
Threads Mount= 1/2" - 32TPI or 1/2" - 28TPI (your choice), rear cap made from Stainless Steel.
Full Auto Rated= Yes, but excessive full auto use that causes increased wear on both gun and suppressor is not recommended.
PRICE= $500  (Sale Price $400)

 

Mk 12 D.E.L.T.A (DeGroat Extended Length Tactical Attenuator) with DTA booster

Shown on a Beretta M9 with a Mk 99 Mod 0 underneath for size comparison.

Length= 12"
Diameter= 1.25"
Weight= less than 14 ounces ounces (exact weight TBD)
Material= Aircraft Grade Aluminum and Heat Treated Stainless Steel
Suppressor Finish= Type III Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type III Hard-Coat Anodized (green)
Blast Baffle= Stainless Steel
Blast Chamber= Stainless Steel
Booster= 100% Heat Treated 17-4PH Stainless Steel, Integrated Booster Design, 10 Point of Impact (POI) Adjustments, O-ring sealed design, No Tools needed for maintenance, interchangeable piston (for mounting on weapons with different thread pitches), strongest booster and most unique booster on the market, 100% designed and manufactured by DeGroat Tactical Armaments, LLC. Patent Pending
Threads Mount= 1/2" - 28TPI, Stainless Steel.  Only thing required to have a different thread pitch is to replace the booster piston with another one, which only takes a matter of seconds.  Extra pistons available in 1/2" - 32TPI, 1/2" - 36TPI, and 13.5-1mm LH at $65 each
Full Auto Rated= Yes, but excessive full auto use that causes increased wear on both gun and suppressor is not recommended.
PRICE= $675  (Sale Price $540)

 

Mk 12 D.E.L.T.A (DeGroat Extended Length Tactical Attenuator) with fixed mount

Built for fixed barrel weapons like an AR-15 with 9mm conversion and other custom 9mm setups, basically same suppressors as the NAVY 9 but longer, more baffles, and quieter.


Length= 12""
Diameter= 1.25"
Weight= 11.5 ounces
Material= Aircraft Grade Aluminum and Stainless Steel
Suppressor Finish= Type III Hard-Coat Anodized (black) and YAG Laser Engraved.
Baffle Stack Finish= Type III Hard-Coat Anodized (green)
Blast Baffle= Stainless Steel
Blast Chamber= Stainless Steel
Threads Mount= 1/2" - 32TPI or 1/2" - 28TPI (your choice), rear cap made from Stainless Steel.
Full Auto Rated= Yes, but excessive full auto use that causes increased wear on both gun and suppressor is not recommended.
PRICE= $575  (Sale Price $460)

 

All Prices Listed Include Shipping

Current Mk99 Mod 0, Mk 9 Mod 0, and NAVY 9 suppressors come with the "U.S. Military" marking, but future suppressors won't have this mark unless they are being built from the same batch of parts as the Military order.

Payment Terms:

Option 1: 50% deposit to place an order and start BATFE transfer, 50% balance after paperwork is approved with the BATFE and you are ready for delivery.

Option 2: 100% Full payment to place an order and start BATFE transfer, as soon as paperwork is approved with the BATFE order will ship.  We also offer a $50 Discount on each order with this option.

All forms of payment are accepted: Checks, Money Orders, and Credit Cards +3%

A signed copy of your or your dealers FFL/SOT is required to start transfer.

Suppressors will transfer on a tax free Form 3 to FFL/SOT holders. If you live in New Mexico we can process your Form 4 free of charge (you still have to pay the $200 to the BATFE for the tax stamp).

            ALL Suppressors are in stock and ready to transfer!

Currently out of stock on the 13.5-1mm LH pistons, but production run is scheduled to start very soon.

Warranty Information:

If any suppressor is proven to have a manufacturer defect, send it back and we will fix or replace the suppressor free of charge.  If the suppressor becomes damaged or requires servicing, send it back and we will service or replace the suppressor for 25% of the listed price.

We recommend using FACTORY threaded barrels or having Tornado Technologies thread your barrel.  We also suggest having Tornado Technologies check your factory barrel to confirm and ensure the threading to be concentric with the bore, otherwise baffle strikes may occur.  DTA is not liable for any baffle strikes, but can repair the suppressor for 25% of the list price of the suppressor.  DTA does not stock or supply threaded barrels.  DTA not offer barrel threading service at this time, all barrels requiring threading should be sent to Tornado Technologies.

The Magnuson-Moss Act (public Law 93-637) does not require any seller or manufacturer of a consumer product to give a written warranty.  It does provide that if a written warranty is given, it must be designated as “limited” or as “full” and sets minimum standards for a “full” warranty.  DTA has elected not to provide any written warranty, either “limited” or “full”, rather than to attempt to comply with the provisions of the Magnuson-Moss Act and the regulations issued there under.  There are certain implied warranties under state law with respect to sales of consumer goods.  As the extent and interpretation of these implied warranties vary from state to state you should refer to your state statutes.

                                               Dealer Prices Available

If you have any questions or would like to place an order please contact us at: Sales@ArmamentSales.com

 

                           Videos:

Mk 99 Mod 0 and Mk 9 Mod 0 Video

(Right Click Here & Save Target As 61.8mb)

 

Mk 99 Mod 0 and Mk 9 Mod 0 Video Low Res

 (Right Click Here & Save Target As 10.29mb)

 

 Mk 99 Mod 0 Fired on Full Auto Glock

 (Right Click Here & Save Target As 2.81mb)

 

 Mk 12 D.E.L.T.A Fired on Beretta M9 with KAC Slide Lock

 (Right Click Here & Save Target As 3.8mb)

 

 CNC Machining of Mk 9 Mod 0 Tube for Front End Cap

 (Right Click Here & Save Target As 7.47mb)

 

Click Here For Higher Res Pictures (More pictures will be added soon.)